Everbuild 825 Tecnic Silicone 380ml

825
Short Description:

Everbuild Tecnic® Silicone 825 is a low modulus, neutral cure, alcoxy, odourless silicone sealant that adheres to a wide range of both porous and non porous surfaces without the need for priming. 

UK Wide Delivery | SIIS Ltd

Availability: In Stock
Price: £5.40 inc. VAT
View Basket
139 Available

Everbuild 825 Silicone 380ml Features: 

UK Wide Delivery | SIIS Ltd

 

Everbuild Tecnic Silicone 825 is a low modulus, neutral curing silicone sealant based on a filled alkoxy curing system, specially formulated to provide extra tool down time on longer joints. Conforms to ISO11600 class F25LM and G25LM when tested to ISO11600.

The sealant is typically used for expansion joints to stone, brick, concrete and composite panels, perimeter pointing around all types of window and door frames, weatherproofing sealing to most external applications, construction and dilation joints where stress does not occur until fully cured.

Everbuild 825 Silicone 380ml Specifications: 

Chemical Base Alcoxy silicone
Packaging 380ml cartridges
Colour White, Black, Mid Grey, Dark Grey, Brick Red, Brown, Buff, Beige, Anthracite, Dark Anthracite RAL 7016, Magnolia, Portland Stone, Limestone White
Shelf Life 12 months from date of manufacture.
Storage Conditions Store in original unopened containers between +5°C and +30°C. Storage outside these parameters may dramatically reduce shelf life.
Density Colours: 1.33 - 1.37g/cm3
Shore A Hardness 20-30
Elongation at Break >200% (ISO 8339, 23°C)
Elastic Recovery >80% (ISO 7389)
Movement Capability (ASTM C719) ±35% (ISO11600) ±25%
Service Temperature -50°C to + 150°C
Joint Design Maximum joint width 50mm, max depth 50% of joint width
                                         Joint widths are calculated as in BS6213:
                                         Width=(M x 100)/F + M
                                         Where M = movement and F = movement accommodation Factor
                                         For maximum movement accommodation, it is recommended that:
                                         1. The sealant joint depth should be no less than 5mm
                                         2. Joint depth should be 5mm for joints up to 10mm wide
                                         3. Joints above 10mm in width should be half the width in depth up to
                                             20mm and minimum 10mm for wider joints
                                         
Yield @ 5 linear metres 9 x 9mm fillet joint
Ambient Air Temperature +5°C to + 40°C
Curing Time mm/1 day approx 2
                      mm/3 day approx 6
                      mm/7 day approx 9
Skin Time 30-45 mins