Everbuild 502 All Purpose Wood Adhesive
502502 All Purpose Wood Adhesive can be used internally and externally and provides a high strength, impact resistance bond that is usually stronger than the wood itself. Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use. Dries clear. Fast cure, initial set in just 10 minutes.
UK Wide Delivery | SIIS Ltd
Dundee - 17 Available
Dunfermline - 0 Available
Edinburgh - 0 Available
Everbuild 502 All Purpose Wood Adhesive Features:
UK Wide Delivery | SIIS Ltd
502 All Purpose Weatherproof Wood Adhesive is a high-quality, resin-based wood adhesive for all wood bonding applications. It can be used internally and externally and provides a high-strength, impact-resistant bond that is usually stronger than the wood itself.
- Dries clear
- Rapid curing – initial set in just 10 minutes
- High degree of water resistance
- Excellent bond strength
- Conforms to the international standard EN 204 (D3) and BS 14256 for creep resistance
- Low timber staining characteristics
- Environmentally-friendly
- Suitable for radio frequency cure
- Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use
Everbuild 502 All Purpose Wood Adhesive Specifications:
Packaging Bottles: Various sizes up to 1L
Jerry Cans: 5L
Colour Dries clear
Shelf Life 12 months
Storage Conditions To ensure safe storage, containers should be well sealed to prevent evaporation of water and the formation of skin on the surface. Store at a temperature above freezing. A temperature of 5-25°C is recommended. Higher
temperatures will affect quality and cause the formation of crusts and skins; especially if the containers are not tightly closed or are subjected to direct sunlight for long periods. During storage, slight separation may occur. (thin layer above thicker layer). This is an aesthetic rather than technical problem. In this case, mix well before applying. If these conditions cannot be met, please refer to our Technical Service Department for advice on storage stability
Density 1.0-1.2 g/cm3 (dispersion)
Solid content by weight 45-50%
Thermal Resistance Stable (4 week @ 50°C)
